Close

22/08/2020

How do I connect my Linksys WiFi extender to WiFi?

How do I connect my Linksys WiFi extender to WiFi?

Plug your Linksys range extender into a power socket and turn it on. Insert one end of the Ethernet cable into your Linksys extender while another end to the router. Connect your computer to an active WiFi connection. Launch an internet browser of your choice.

How do I setup my Linksys network?

  1. On the web-based setup page, click the Wireless tab.
  2. Select Manual for the Configuration View.
  3. Select Mixed on the Network Mode drop-down list.
  4. Enter your desired Network Name (SSID) in the field provided.
  5. Select Auto (20MHz or 40MHz) from the Channel Width drop-down list.
  6. Select a Channel from the drop-down list.

How do I fix my Linksys wifi extender?

How to reset a Linksys WiFi Range Extender

  1. Use a paper clip or pin and gently insert it into the reset hole of your Linksys device.
  2. Hold it for a couple of seconds and after that, release it.
  3. Wait for a few minutes for your Linksys device to fully reboot.
  4. Once your device has been reset successfully, restart it once.

How do I connect my icecrypt to my TV?

Unpack the Icecrypt receiver, install the batteries in the remote, and connect to a TV or Monitor using either the supplied HDMI cable or supplied AV leads, connect the power adapter lead (do not connect to an antenna at this point), and switch on using the red Power button on the remote (there is no power switch on the receiver itself).

Is the Internet time fixed in icecrypt update?

Internet time was fixed in that release and keeps perfect time now. It was one of the fixes that was requested and Icecrypt’s support has been great.

Which is the latest version of icecrypt firmware?

PLEASE NOTE: IceCrypt is no longer trading. You may need to register at the site first for the download link to work. At the current time of writing, the latest version of the custom firmware is 1.6.41 (scroll down the thread as the latest posts are at the bottom).