Close

07/01/2020

How do I control my Totaline thermostat?

How do I control my Totaline thermostat?

How do you set a Totaline thermostat?

  1. Press and hold down the Mode button, then press and hold ‘Override’ for 2 seconds.
  2. Use the direction buttons to set the values you want.
  3. Press Mode to proceed.
  4. Repeat the first step to finish up.
  5. If you have a program switch, simply slide to ‘set’.

What happens if your home thermostat is not working?

Try replacing the batteries, then check for a blown fuse or tripped breaker in the electrical panel. If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If the wiring looks corroded, consider replacing the thermostat.

How do I set the temperature on my Totaline thermostat?

Totaline thermostats control both your heating and cooling systems. Selecting each system is done with the “Mode” button. To set the heater operation, press the “Mode” button until the word “Heat” appears on the display. The current “Heat” mode temperature appears under the word.

How do I turn on my AC Totaline thermostat?

Follow the steps below:

  1. Start by pressing and holding the Mode button.
  2. With the Mode button still pressed, press both the Up and Down buttons together.
  3. The locked icon will disappear and you’ll be able to operate the thermostat normally. The thermostat might not notify or display any changes after being unlocked.

How do you clear a thermostat override?

To completely bypass all programming, simply press the HOLD button once. HOLD will appear in the display. For as long as HOLD appears in the display the thermostat will not change the set-point temperature unless you adjust it yourself with the up or down arrow buttons.

How do you unlock a Totaline commercial programmable thermostat?

How to unlock a Totaline thermostat?

  1. Start by pressing and holding the Mode button.
  2. With the Mode button still pressed, press both the Up and Down buttons together.
  3. The locked icon will disappear and you’ll be able to operate the thermostat normally.