How much is an ICOM 718?

How much is an ICOM 718?

$617.95Free Shipping! The HF bands allow you to communicate over long distances covering many km even to the other side of the world. With the superior performance found in the IC-718 such as wide dvnamic range, high C/N ratio, and full duty operation you will find making these contacts easy.

Does the icom 718 have a built in tuner?

It has a built in 4:1 balun, you can also use single wire feed and one coax feed. Simple little tuner. Very small, you can fit it in anywhere on your desk. It would tune just about any antenna I hooked up to it.

Does the Icom 718 have an antenna tuner?

mAT-TUNER Automatic Antenna Tuners – IC-718 Fits Transceiver Model. DX Engineering Super Card – Build Your Dream Station with the Best Gear – Apply Today!

How does a antenna tuner work?

An antenna tuner (and any of the names in the list below) is a device that is inserted between a radio transmitter and its antenna; when properly adjusted (tuned) it improves power transfer by matching the impedance of the radio to the impedance of the antenna, as it appears end of the feedline connected to the antenna …

Should I use an antenna tuner?

Antenna tuners are particularly important for use with transmitters. However the antenna and feedline impedance can vary depending on frequency and other factors. In addition to reducing the power radiated by the antenna, the mismatch can distort the signal, and in high power transmitters may overheat the transmitter.

How do automatic antenna tuners work?

Automatic antenna tuner is the device that is use to tune the antenna to get the signal. The term automatic means that the tuner can tune the antenna by matching the impedance automatically when connected to the radio transmitter.

What is the purpose of antenna tuner?

An antenna tuner is a device that connected between radio transmitter and antenna. The purpose of antenna tuner is to improve power transfer on the transmission line by matching the impedance of the equipment to antenna.

How big is the ICOM ic-718 transceiver in meters?

The Icom IC-718 covers 160-10 meters. This radio is very easy to operate with one touch band switching, direct frequency input via keypad and auto tuning steps (senses the rate at which the tuning knob is turned).

Is the Comerica 718 still made by ICOM?

I believe Icom still make the 718 and the Comerica version of it the IC78, that must tell you how good they are. Time Owned: more than 12 months. It is NOT a 7800, but it is an excellent BASIC HF rig. If you are a CW fan, you will want to add the optional narrow filter.

Is the ic-718 a good ham radio?

The IC-718 is a pretty straight-forward rig. No bells, no whistles. It has a double-conversion hot receiver and a reliable 100W key-down transmitter which is more than enough for most of ham applications. When I say “hot” I mean it is really sensitive (see later).

Which is the antenna tuner for the ic-718?

Either the optional antenna tuner unit, AT-180 or AH-4 can be used with the IC-718 to suit your installing conditions, or operating style. Of course, the AH-4 control circuit is built into the IC-718. The IC-718 is equipped with a minimum number of switches and controls for superior feature selectability.