What battery does Moto E use?

What battery does Moto E use?

The Moto e sports a 3,550mAh battery.

Does the Motorola Moto E have a replaceable battery?

Since the first Moto E, Motorola’s strived to pack in as much smartphone for under $200. Underneath the hood are acceptable specs for a $150 phone: Qualcomm Snapdragon 435 octa-core chip, 2GB of RAM, 16GB of storage (expandable up to 256GB via microSD card), and a 3,000 mAh removable battery.

Where is the battery on a Moto E?

The battery on this phone is under the motherboard and will require the removal of the display, few screws, connectors and plastic parts. If your battery is swollen, take appropriate precautions.

How long does the Moto E battery last?

20 hours and 39 minutes
The Moto E lasted 20 hours and 39 minutes. That beats out the Galaxy A01, which lasted 10 hours, 27 minutes. This likely has to do with the less-than-demanding 720p display, large battery and the Qualcomm Snapdragon 632 processor. And that processor performs well for the price point.

How long does it take to charge Moto E 2020?

The battery takes between 3~5 hours to charge based on your use during the charging period.

Is it possible to replace the Moto E Battery?

Turn off the device before beginning the battery replacement. To remove the back cover, start at one corner and stick the plastic opening tool under the cover and pry it away from the phone. With the plastic opening tool, pry all the way around the phone while lifting up on the cover.

When did the Motorola Moto E 2nd Gen come out?

Motorola Moto E (2nd gen) Released 2015, February 145g, 12.3mm thickness Android 5.0/5.1 – only XT1527, up to 6.0

What are the specs of the Motorola Moto E?

Motorola Moto E (2nd gen) Released 2015, February. 145g, 12.3mm thickness 0.4% 10,013,819 hits 151 Become a fan 4.5″ 540×960 pixels 5MP 720p 1GB RAM Snapdragon 200 2390mAh Li-Ion

What should I do if my Moto E Battery is swollen?

If your battery is swollen, take appropriate precautions. Turn off the device before beginning your repair. Using a heat gun, carefully apply heat around the edges of the display to soften the glue. Heat should be applied to the point where the phone isn’t too hot to touch, but close enough.