What is force cup plunger?
A plunger, force cup, plumber’s friend or plumber’s helper is a tool used to clear blockages in drains and pipes. It consists of a rubber suction cup attached to a stick (shaft) usually made of wood or plastic.
How do you use a force pump?
To operate a force pump, users depress a lever or handle above the ground. Once the handle is depressed, an underground cylindrical piston is forced down into the well. As the piston passes through the water, the water is forced upward around the sides of the piston.
Whats the difference between a cup plunger and a flange plunger?
Flange plungers look very similar to cup plungers. The difference is that a flange plunger has a longer handle and a soft, smaller cup (known as a flange) that extends down the bottom end of the plunger.
How do you use a cup plunger?
How to use a cup plunger
- Step 1 – Pick up plunger. Arm yourself with a cup plunger.
- Step 2 – Remove plugs. Remove any plugs or drain covers from the drain.
- Step 3 – Seal off over flow.
- Step 4 – Ensure a tight seal.
- Step 5 – Submerge plunger.
- Step 6 – Angle entry.
- Step 7 – Cover drain hole.
- Step 8 – Press down firmly.
What is a force pump used for?
Force-pump meaning A pump with a solid piston and valves used to raise a liquid or expel it under pressure.
What is the difference between force pump and lift pump?
The only difference between this and the simple lift pump is that the lift and force pump has a stuffing box around the pump rod at the top of the pump body to prevent water from flowing out that way. This allows the piston to be removed by simply pulling the pump rod up.
How do I clear a blocked external drain?
You can start by using the same methods you’d try for clearing an inside drain blockage.
- Pour boiling water down the drain.
- Add a cup of bicarbonate of soda.
- Now add a cup of vinegar and watch it start to fizz and froth.
- Replace the drain cover loosely and let it work its magic for a few hours.