Is Cedar good for shutters?

Is Cedar good for shutters?

Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.

What kind of cedar is used for shutters?

Western Red Cedar shutters are a popular alternative to the more popular wood species such as Basswood.

What is the best wood to make shutters out of?

Cedar is the most commonly used wood as a material for creating exterior shutter. Not only shutters, but cedar wood is also actually used for many exterior applications. The chief reason for using cedar is that it’s dimensionally stable. This means it’s resistant to warping and twisting.

Can I make my own shutters?

Bought wood shutters can be extremely expensive – but if you don’t want to spend lots of money, you can just make your own. If that sounds like the kind of solution you’re looking for, this plan will show you how to build shutters yourself – while spending less than $40 on the project.

How long do exterior wood shutters last?

These shutters can last up to 20 to 30 years (or another 30 years if stripped and recoated!), for an affordable price, with little maintenance.

How thick are cedar shutters?

Board & Batten Cedar Shutters Constructed from 1″ thick equally spaced, custom sized boards.

Can you use untreated wood for shutters?

There are definitely more than one way to construct and hang shutters – I am simply sharing how we did it! Supplies needed to build shutters: Untreated Pine (we used 1.5 inch thick pine wood for the backboards and 3/4 inch thick pine for the cross board)

Is it easy to build a cedar shutter?

Building cedar shutters is a project that can add charm and elegance to a home, while at the same time, bringing pride of ownership to the homeowner. These functional and attractive window additions are easy and quick to build, requiring a minimum of skill and tools.

How do you hang a shutter on a house?

Drill pilot holes near the top and bottom edges of the shutter. Using the hammer drill, make a pilot hole in the house. Hang the shutter using masonry screws. Check that it’s level before securing the bottom. Attach the top and bottom rails, covering the screwheads.

What kind of sandpaper to use on cedar shutters?

Begin by rough sanding the shutters with 100 grit sandpaper to add a smooth finish to them. Work up to 220 grit to bring the cedar to a fine and natural finish. Wipe the shutters with a clean cloth saturated with mineral spirits.

Where do you put the hinge on cedar shutters?

Mark hinge locations approximately 6 inches from the top and bottom of the shutters. Use a hinge-centering drill attachment to center the hinge screws before driving them home. Cedar shutters can be fastened shut with hardware suited for this purpose and secured in the open position, again using hardware designed for this purpose.