Can I put unvented cylinder in the loft?

Can I put unvented cylinder in the loft?

Unvented systems can be installed almost anywhere in the home as no additional water tank is required. Lightweight slimline cylinders can fit in the same space as vented cylinders, while horizontal cylinders can be installed into homes with loft conversions.

Can you have a hot water cylinder in the loft?

by moving a vented hot water cylinder to the loft you must raise both the cold storage tank above it and also the central heating tank. it can be done but the only real way of knowing in your case would be to get a few heating engineers to come and give you a quote.

Can you put hot water cylinder in attic?

It’s not a major move and is been done more and more now, you can even order a hot water tank that basically lying down in your attic so height restrictions are not a problem.

Can I put my Megaflow in the loft?

As the Megaflo or Unvented system is pressurised, it can be sited virtually anywhere; it does not rely on a header tank to provide a head of pressure. Common locations are within an airing cupboard, a downstairs cupboard, utility room, loft, garage or basement.

Where do you put an unvented cylinder?

An unvented cylinder can be installed anywhere in the home, whereas a vented cylinder needs to be located beneath the cold water tank in the attic. Unvented cylinders are often quieter as there is not gurgling due to the water tank being refilled slowly.

Can I put an unvented cylinder in the garage?

Because unvented hot water cylinders are pressurised systems, they can be installed in almost any location, making them ideal for homeowners that are tight for space. You can install them in a loft, garage, downstairs, wherever suits, although you will have to accommodate for a safety discharge pipe.

Can I put my immersion heater in the loft?

Yes you can put your hot water cylinder in the loft, But: the cold water cistern all ready in your loft which feeds the cold water to the cylinder, will need to be raised so the bottom of the cold water cistern is above the top of the hot water cylinder.

Can you fit an unvented cylinder yourself?

Can unvented cylinders explode?

All exploded cylinders were unvented, if they’d been vented, they wouldn’t burst. It’s the cylinder’s way of letting you know the pressure relief didn’t work.

Are unvented cylinders a good idea?

Because they use mains pressure, they can provide a much more even flow for baths and showers. Once installed, unvented cylinders can give you real savings in terms of energy efficiency; good for the environment and your pocket.

Can you put hot water cylinder in garage?

While it is possible to mount outside, it is preferred to do so inside, unless you have a hot water heat pump which is specifically designed for outside installation. If the main issue is a lack of space inside, the water heater can be placed outside or in colder areas such as balconies or garages.