How do you drain racor 500fg?
How do you drain racor 500fg?
1. Close inlet valve (or valve #1) and open drain on bottom of bowl with a suitable container in place. 2. Close drain after all water and contaminants have been evacuated—DO NOT leave drain open too long as it will eventually completely drain entire filter assembly of water AND fuel.
How do you bleed a Racor filter?
There is a bleed screw on top. Put a bag under it and open the screw and bleed fuel out of it. If you are replacing the fuel filter, pull the hose off it and run fuel into the new filter before you attach it. After bleeding it go to the injector bleed screw located just foward of the air filter.
How do you drain a boat fuel water separator?
Draining the water is quite simple and involves loosening a nut under the bowl so the water, which is in the bottom of the bowl, can drain out. You need a torch, either on your head or clamped to the boat, the right spanner and a container to catch the water.
Can you clean diesel fuel filters?
Refueling. If you’re wondering whether you should remove a fuel filter and then clean it by rinsing or blowing it out before putting it back into the system, the answer is a resounding no. Fuel filters are an important piece of engine maintenance, and they’re relatively easy to stay on top of.
How do you prime a fuel filter on a boat?
How to Prime a Fuel System on a Boat:
- Make sure that the primer bulb is on the engine side of the water separator bracket.
- Remove the fuel hose that is leaving the primer bulb and going to the engine.
- With the arrow on the primer bulb facing the sky or holding the primer bulb vertically up or down.
How often should you change Racor fuel filters?
How do you know when it’s time to change a Racor fuel filter? As a guideline, change a fuel filter element every 500 hours, 10,000 miles, every other oil change, annually, or at first indication of power loss, whichever occurs first.
Who makes Racor filters?
Parker Hannifin Corporation
Racor, a Division of Parker Hannifin Corporation, is the global leader in fuel, air, oil, and coolant filtration systems for internal combustion engines and fuel delivery applications.