17/09/2019

What is an onboard 1394 controller?

Onboard 1394 Device (Firewire) : This feature enables or disables the built-in IEEE 1394 (Firewire) port on the PC. If the system does not have any Firewire devices, or if the Firewire connector is not plugged into the motherboard, disable this device to free up valuable resources.

Should I disable serial port?

Onboard Serial Port 1: Most people no longer use serial ports for connecting external peripherals, as most serial devices have been replaced by USB equivalents. If your customer does not use the system’s serial ports, disable the ports and free up the resources for other things.

How do I enable parallel ports in BIOS?

Alternative solution

Enter the BIOS by pressing F2 while the computer is starting up.
In the BIOS setup screen, press the Down Arrow key repeatedly until you have highlighted Integrated Devices.
Press the Down Arrow key repeatedly until Parallel Port is highlighted.

What is serial port configuration in BIOS?

Onboard Serial Port: This setting allocates an address and IRQ for your motherboard’s serial port. Unless you’re experiencing any IRQ conflicts, you should leave this setting on Auto (if it’s an option), or however it comes configured by default (typically 3F8/IRQ4).

What does onboard LAN controller mean?

A LAN (local area network) interconnects several computers using Ethernet technology. Onboard LAN is a specialized chipset on the motherboard designed to handle networking responsibilities for the computer, such as home networking and Internet connectivity.

Should I disable unused SATA ports?

I typically disable unused SATA ports since it’ll help slightly with POST times on some systems. I also make sure to set my hard drive as the first boot device, this sometimes saves a second or two on boot times.

Can I disable serial port in BIOS?

Use the BIOS Serial Console Port option to redirect video and keystrokes through the serial port to operating system boot. This option can interfere with nonterminal devices attached to the serial port. In such cases, set this option to disabled.

How do I enable parallel ports in Windows 10?

Click the Hardware tab, and then click Device Manager. Click to expand Ports, right-click Printer Port (LPT1), and then click Properties. If have more than one printer port installed on your computer, click LPT2 or LPT3. Click the Port Settings tab, click Enable legacy Plug and Play detection, and then click OK.

What should the parallel port mode be?

Parallel ports can be configured as LPT1, LPT2 , and LPT3. When a single parallel port is found in the system, regardless of its configuration, it is always designated as LPT1. The configurations for LPT2 and LPT3, shown in Table 8.2, apply when you have a computer with more than one parallel port.

How do I enable ports in BIOS?

Turn on or restart the PC.
Check the screen for instructions to boot to setup.
Press “Pause Break” and press the appropriate keys to access system setup.
Use the arrow key to select “Advanced,” “Onboard Devices” or “Integrated Peripherals” from the menu.

What is an onboard controller?

The TwisTorr 84 FS onboard controller is a small turbo pump control unit able to read pressure via active gauges. The onboard controller can be mounted on or by your pump, with two versions available: 24 Vdc or 100–240 Vac.

What does onboard 1394 do on a PC?

Can a 1394 header be connected to a USB header?

Plugging a 1394 header cable into the USB header connection or the USB header cable into a 1394 connection will damage a motherboard. Always consult your motherboard manufacturer manual before connecting anything to the 1394 or USB header. A motherboard can have a header for any component that allows an external connection.

What is a 1394 net adaptor connection and why is it in my network connections?

What is a “1394 Net Adaptor Connection” and why is it in my Network Connections? A 1394 Net Adaptor Connection is basically Win2k/XP’s way of telling you that you have a Firewire interface installed in your system.

Eyebulb.com