What is CD error in washing machine?
What caused the Cd error? The error is found only in modern models of the combined type: washer + dryer. It is an informational message that the clothing cooling mode is running. The cycle lasts 4 hours. So the clothes cool and straighten to prevent wrinkling.
What is CD code in LG washing machine?
LG Washer / Dryer Error Codes and Resolutions
|IE||Washer unable to fill with water|
|OE||Washer is unable to drain the water it used during the wash cycle|
|t CL||Tub Clean Cycle|
What is CD in Samsung washing machine?
SAMSUNG DC ERROR CODE: The DC error code shows on your washers display when your Samsung washer is unable to spin DUE to an unbalanced load.
What are the error codes of LG washing machine?
Select the error code on your display:
- SUD Error Code. If the washing machine detects too many suds, it displays this error code and adds a suds reducing cycle.
- CE Error Code.
- cD Error Code.
- CL Error Code.
- dE Error Code.
- dE1 Error Code.
- dE2 Error Code.
- FE Error Code.
Can’t open my LG washing machine door?
Here’s how to unlock the door:
- Unplug the machine to let it cool off.
- Place pans and towels in front of the machine.
- Open the door after 45 seconds.
- Drain the excess water and check the latches and hinges.
- Close the door, plug it back in, and turn the machine back on.
Where does bleach go in LG washer?
Your LG front load washing machine bleach dispenser is located in the washer’s dispenser drawer.
What is the wm3677 combo training manual for?
WM3677 COMBO Page 4 of 68 TRAINING MANUAL IMPORTANT SAFETY NOTICE The information in this training manual is intended for use by persons possessing an adequate background in electrical equipment, electronic devices, and mechanical systems. In any attempt to repair a major appliance, personal injury and property damage can result.
What does CD mean in LG washing machine?
What does CD mean in LG washing machine? 5 “CD” means “cool down,” and is an automatic feature of the dryer to prevent the clothes from wrinkling should you not remove them immediately after the dry cycle ends. Basically, hit the “start/pause” button to end the cycle and unlock the door.
Is there an error code on the LG pedestal washer?
Watch this video to learn about LG Pedestal Washer – Understanding Error Codes. If the washing machine detects too many suds, it displays this error code and adds a suds reducing cycle. This adds about 2 hours to the cycle time. If too many suds are detected during spinning, the washing machine stops to help prevent leaking.
Why do I get a CE error code on my washing machine?
The CE error code indicates that there has been an over-current in the electrical circuit of the motor. It is caused by a short circuit, loose connection, ground fault or power surge. Unplug the washer for 10 seconds. Plug the washer back in and attempt to run a cycle.