What is Loxon conditioner for?

What is Loxon conditioner for?

Loxon is a line of specialty masonry coatings made by the Sherwin-Williams company that includes primers, block surfacers, conditioners, stains, and topcoats. This conditioner was designed to help “tie-down” or bond lightly-chalking concrete and masonry so the paint topcoat will adhere better to the surface.

Is Loxon conditioner a primer?

I was recommended (by sherwin willuams) this product as a primer for covering my existing light green paint. I was told that by using this primer, I would only need one coat of paint. The Loxon concrete and masonry primer is the best primer I’ve ever used.

How long before you can paint over Loxon primer?

For exterior use, this primer/sealer must be topcoated within 14 days to prevent degradation due to weathering. WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead.

What is acrylic conditioner used for?

Paint conditioner is a synthetic protective coating applied to acrylic car paint to restore its shine, fill in scratches and protect it from the elements. Acrylic paint conditioning products are a one-step spray-on system applied every few months to vehicles.

How do you use Loxon?

LOXON XP IS EASY TO APPLY Spray it on. Roll it on. Or in smaller jobs, brush it on. For best results, this product should be applied at a minimum of 14 – 18 wft * (wet film thickness) and 6.4 – 8.3 mils dft (dry film thickness).

What is masonry conditioner?

Masonry conditioner is a pigmented sealer and surface conditioner recommended for use on exterior masonry such as brick, block, and weathered or bare stucco. Allow the primer to dry for 24 hours.

Does Loxon paint need primer?

Loxon Concrete & Masonry Primer/Sealer is an acrylic coating specifically engineered for interior and exterior, above-grade, masonry surfaces requiring a high performance primer. It is highly alkali and ef.

How do you use Loxon primer?

And how do you use Loxon XP? Remove all internal and external corners and edges with 1 coat of Loxon XP coating. For good waterproofing and alkali resistance, 2 coats MUST be applied between 14.0-18.0 wet miles per coat. Use in temperatures between 50 ° F and 100 ° F.

How long does Sherwin Williams Loxon primer take to dry?

7 days
Rough sur- faces can be filled to provide a smooth surface. If painting cannot wait 30 days, allow the surface to cure 7 days and prime the surface with Loxon Acrylic Primer.

Can you paint over Loxon?

The Loxon XP product is extremely thick; although the manufacturer suggests that it can be rolled directly onto the surface, we would highly recommend spraying this onto the stucco and back rolling (using a roller like you would paint walls to work the product into the stucco surface).

What is acrylic paint conditioner?

Floetrol Acrylic Paint Conditioner is a water-based additive for acrylic paints, used to improve flow and workability. Floetrol Paint Conditioner allows you to make acrylic paints thinner and easier to apply without sacrificing the integrity, colour or hold of the paint.

What is acrylic car wax?

Item Description: Ultima Acrylic Spray Wax is a spray-on wax formula that creates a protective barrier between your vehicle and the elements. Ultima Acrylic Spray Wax is an extremely hydrophobic formula that allows most contaminants to roll off with the first drop of water to hit the surface.

How to use Loxon acrylic conditioner on concrete?

Easily applied with a brush, roller, or spray without reduction. Loxon Conditioner bonds light chalk, and dusting concrete. Plus, since its dry to the touch in 30 minutes and ready for recoating in just 3 hours, you can finish the job the same day. All prices displayed are for U.S. Sherwin-Williams locations and are in U.S. Dollars.

How many coats of Loxon conditioner for stucco?

If you’re collecting bids for your stucco painting project, don’t be surprised if many of them will include a specification for 1 coat of Loxon Conditioner followed by 1 coat of an acrylic topcoat.

Is it OK to use Loxon conditioner on coastal homes?

While Loxon Conditioner is a wonderful product when used in the appropriate situation, its widespread use on homes — especially those in coastal areas — may very well exceed its intended purpose.

How long does it take Loxon to dry concrete?

Easily applied with a brush, roller, or spray without reduction. Loxon Conditioner bonds light chalk, and dusting concrete. Plus, since its dry to the touch in 30 minutes and ready for recoating in just 3 hours, you can finish the job the same day.