What is the tilter of a blind?

What is the tilter of a blind?

Tilt mechanisms are the encased gear enclosures mounted in the headrail, that operate the rotation of the slats, or vanes, by the twisting of a wand or the pulling of cords. Fix My Blinds carries tilters for horizontal and vertical blinds.

What are the parts of vertical blinds called?

Vertical Blinds

• Valance Clips.
• Valance Corners.
• Carrier Clips.
• Bead Chain.
• Brackets.
• Control Ends.
• Fabric Vane Parts.
• Retainers & Fasteners.

What is control position on blinds?

Control Position – Left: Control will be on the left side when you are facing the shade. Control Position – Right: Control will be on the right side when you are facing the shade. Top Down, Bottom Up: The shade can be raised or lowered from the top and bottom.

What are the different parts of blinds called?

Parts List & Definitions

• Hold Down Brackets. Hold down brackets are used to hold the bottom of the blind in place, mostly used for blinds mounted on doors.
• Extension Brackets. Extension brackets are used to project a shade or blind from the wall.
• Spacer Blocks.
• Mounting Brackets.
• Tassel.
• Cord Joiner.
• Tilt Wand.
• Valance.

What are the individual pieces of blinds called?

Slats. The individual pieces of a horizontal blind that cover the window and are held together by the braided ladder.

What are the tilt mechanisms on my blinds?

Tilt mechanisms are the encased gear enclosures mounted in the headrail, that operate the rotation of the slats, or vanes, by the twisting of a wand or the pulling of cords. Fix My Blinds carries tilters for horizontal and vertical blinds.

How big is the hole in the wand tilter?

Wand Tilter 1″ Mini Blind w Black Shaft Clip, Hex Hole. Metal. 1/4″ Hexagon Hole. Not all the way thru. Metal Body, Shaft & Gear. Wand Tilter 1″ Mini Blind, 1/8″ Square Hole. Plastic body w metal shaft. 10-3510-MTL Plastic Body, Metal Shaft, Hook & Sleeve included. Wand Tilter 1″ Mini Blind, Small D Hole.

What kind of controller do I need for vertical blinds?

Wand tilt controller used in certain vertical blinds. Wand tilt controller used in certain vertical blinds. Wand tilt mechanism for some vertical blinds that have an offset tilt rod. Right hand control end for Decomatic vertical blinds. This control is for an un-notched head rail. Vertical blind control end for string and chain.

How tall should your headrail be for a wand tilter?

The Height of your Headrail. LOW Profile = 1.5″, or HIGH Profile = 2″, Mini = 1″ The Hole Shape of Your Tilter needs to match the shape of the tilt rod. Common hole shapes are: SQUARE, HEX, D, RECTANGLE As long as these 2 elements (Height of headrail + Hole shape of Tilter) are the same, the rest of the differences are NOT critical.